B&W outdoor.case type 1000

The outdoor case—without limits

An extremely stable case for the outdoors that can actually withstand any roughness is a rare thing. Our outdoor.case type 1000 steps in where other cases give up. The shell is made of impact-resistant, heat-resistant polypropylene (PP). The case’s design has been precisely engineered for the variety of external influences found outdoors. This means that wherever you stow it, the rubber seal on the outdoor.case will seal it up completely when closed and the additional egg crate foam under the lid will protect what you put inside the case. This makes it ideal as a camera case or DJI Mavic Pro accessory. It is also practical: This outdoor.case is stackable, making it always well organized even in large numbers.

All features at a glance

• Extremely stable case: shell made of polypropylene (PP)

• UN Certificate of Approval UN 2380/81 & UN 3090/91 possible on request

• Stackable

• Dustproof

• Temperature-stable

• Waterproof (IP67 rating)

• Airworthy: automatic pressure equalization valve

• Egg crate foam under lid

• Eyelets for padlock 

• Inner dimensions: 250 x 175 x 95 mm | 9.8 x 6.9 x 3.7 inch

• Outer dimensions: 270 x 215 x 105 mm | 10.6 x 8.5 x 4.1 inch

• Weight: 0.7 Kg | 1,54 Ib

• Volume: 4.1 L

• Available in four colors: black, yellow, gray, orange

• Interior options: empty, divider system (RPD), precut cube foam (SI)

• 30-year warranty

3D view

The case in detail.

The type 1000: a waterproof case for every occasion

The outdoor.case type 1000 is not only a waterproof case, it is also perfectly protected from dust and fluctuating temperatures. This has been confirmed by national and international certifications, such as the UN Certificates of Approval UN 2380/81 & UN 3090/91 and the IP67 rating.

outdoor.case with practical pressure equalization valve

An airtight case is practical. Even more practical is the pressure equalization valve in our outdoor.cases, which automatically equalizes the pressure in the case. This allows the outdoor.case type 1000 to go anywhere your trip takes you—even on an airplane. Thanks to the two-way pressure equalization valve, temperature and pressure changes are completely offset automatically.

As a camera case or an outdoor case: The outdoor.case type 1000 is as flexible as you are!

Give your outdoor case type 1000 a custom upgrade and make it ready for any challenge. Start with the exterior: The PP shell comes in four appealing colors: black, yellow, gray, and orange. So far, so good. For the interior of the outdoor.case type 1000, you can choose between readily customizable pick-and-pluck foam, a padded divider system, and/or a practical lid pouch or mesh pocket. A mounting frame can also be purchased (for mounting instrument panels, for example) for the type 1000. This ideal outdoor case is rounded out with our matching shoulder strap for comfortable transport.

                                    A (A1): 10.63 inch / 270mm

                                    B: 8.46 inch / 215mm

                                    C: 4.13 inch / 105mm

                                    A (A1) inside: 9.84 inch / 250mm

                                    B inside: 6.89 inch / 175mm

                                    C inside: 3.74 inch / 95mm

                                    D (lid) inside: 0.98 inch / 25mm

                                    E (bottom) inside: 2.76 inch / 70mm

Type 1000_1000O.pdf

Write an evaluation

Evaluations will be activated after verification.